Phone: 0086-13835148369
Tel: 0086-351-6814836 Ext.8032
Fax: 0086-351-8390339
E-mail: sxmidas.com@aliyun.com
Website2:www.midaspipelines.com
Steel pipe fitting:
Cap, also known as the head, the plug, the tube cover, It is used to close the pipeline, same with the role of the block. The convex cap includes hemispherical cap, oval cap, saucer cap and sphere crown cap.
|
Elbow is a pipe fitting which changes the direction of the pipe. The angle, 45 °, 90 ° and 180 °are the most commonly used elbow. According to its radius of curvature to points, it can be divided into long radius elbow and short radius elbow.
|
Tee is mainly used to change the direction of the fluid, used in the branch of main pipeline. According to the shape, it can be divided into T-shaped and Y-shaped Tee. According to the diameter equality it can be divided into equal Tee and Reducing Tee.
|
| Reducer is a pipe fitting in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). According to the shape, it can be divided into concentric reducer and eccentric reducer. |
| Nominal size: DN15-1200mm |
| Thickness: SCH5S- SCHXXS |
| Standard: ASME/ANSI, DIN, JIS BS,JB, SH, HG, such as ASME/ANSI B16.9, ASME/ANSI B16.11, ASME/ANSI B16.28, ASME B16.5, ASME B16.3-1998, MSS SP-43, MSS SP-83, MSS SP-97, GB/T12459－2005,GB/T13401－2005, SH3408, SH3409,HG/T21635,DL/T695,SY/T0510, DIN2617 |
| Material:Carbon steel: ASTM A234, ASTM A105, st37, ASTM A403, 20#、Q235、Q345B、16Mn Alloy steel: P5、P9、P11、P22、P92、12Cr1MoV、15Mo3、15CrMo、Cr5Mo、Cr9Mo、 15CrMoG、22CrMoG、10CrMo910 |
| Surface: black painting, hot galvanized, galvanized, anti-rust oil |
| Test: material quality, welding quality, level and verticality, non-destructive testing, water pressure test |
Stainless steel fitting:
Cap, also known as the head, the plug, the tube cover, It is a pipe fitting which is welded at the end of the pipe or covered in the external thread of the pipe. It is used to close the pipeline, same with the role of the block. The convex cap includes hemispherical cap, oval cap, saucer cap and sphere crown cap.
|
Elbow is a pipe fitting which changes the direction of the pipe. The angle, 45 °, 90 ° and 180 °are the most commonly used elbow. According to its radius of curvature to points, it can be divided into long radius elbow and short radius elbow.
|
Tee is mainly used to change the direction of the fluid, used in the branch of main pipeline. It can be divided into T-shaped and Y-shaped Tee. According to the diameter equality it can be divided into equal Tee and Reducing Tee.
|
| Reducer is a pipe fitting in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). According to the shape, it can be divided into concentric reducer and eccentric reducer. |
| Stub end, is also called lap joint or Vanstone flared lap, One end is for the welding connection side, the other end is connected to the core of the loose flange to extend the pipeline. |
| Nominal size: DN15-600mm |
| Thickness: SCH5S-SCHXXS |
| Standard: ASME/ANSI, DIN, JIS BS,JB, SH, HG, such as ASME/ANSI B16.9, ASME/ANSI B16.11, ASME/ANSI B16.28, ASME B16.5, ASME B16.3-1998, MSS SP-43, MSS SP-83, MSS SP-97, GB/T12459－2005,GB/T13401－2005, SH3408, SH3409, SH 3410, HG/T21635,DL/T695,SY/T0510, DIN2617 |
| Material:1Cr18Ni9Ti、0Cr18Ni9、00Cr19Ni10、00Cr17Ni14Mo2、301、310、304、 304L、18-8、321、316、316L、904L、2205、S31803、S32750 etc. |
| Surface: pickling, annealed, polished and sandblast finishing |
| Test: material quality, welding quality, level and verticality, non-destructive testing, water pressure test |
Phone: 0086-13835148369
Tel: 0086-351-6814836 Ext.8032
Fax: 0086-351-8390339
E-mail:sxmidas.com@aliyun.com